KYOCERA S-9100DN User Manual download pdf (Page 93)

B-1

Appendix B Expansion Memory

This appendix first explains how to remove the main circuit board

and then how to install a DIMM (Dual In-line Memory Module) on

the main circuit board.

Expanded printer memory enables you to print more complex

pages, download more fonts, and define more macros.

The main circuit board of the printer is equipped with two sockets

for memory expansion. Expansion memory is available in the

form of DIMMs.

The expansion memory should be installed only by a Kyocera

Mita authorized dealer or Kyocera Mita certified technician. Ky-

ocera Mita shall not be liable for damage due to improper instal-

lation of the expansion memory.

The following instructions are intended for the technician only.

Protect the electronics by taking these precautions:

• Before touching the main circuit board and DIMM, touch a wa-

ter pipe or other large metal object to discharge yourself of

static electricity. While doing the work, it is recommended that

you wear an antistatic wrist strap.

• Touch the main circuit board and DIMM only at the edges.

Remove the main circuit board completely from the printer as fol-

lows:

Turn off the printer and disconnect the power cord and

printer cable.

Remove the two screws from the printer.

Pull the main circuit board all the way out of the printer.

Before pulling the main circuit board out, clear away the area,

behind the printer. Foreign objects, accidentally sticking to the

back of the main circuit board, can cause serious damage to the

printer.

1. Removing the Main Circuit Board

NOTE

1.1 Notes on Handling the Main Circuit

Board and DIMM

YES

1.2 Removing the Main Circuit Board from

the Printer

NOTE

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 142 143

No comments

KYOCERA S-9100DN User Manual Page 93