KYOCERA S-9100DN User Manual download pdf (Page 18)

Chapter 3 Using the Operator Panel

3-2

The following indicators light up during normal operation and

when the printer needs attention.

The message display gives information in the form of short mes-

sages. The eight messages listed below are displayed during

normal warm-up and printing.

Other messages that may appear when the printer needs the op-

erator’s attention are explained on page 4-4.

The interface Indicator shows the interface that is currently used.

It uses the following abbreviations:

PAR

Standard bi-directional parallel interface

SER Serial interface (RS-232C)

NET Network interface

OPT

Option network interface card

--- No interface is active.

Each interface has a timeout time of 30 seconds during which

the other interface should wait to receive a print job. Even if a

print job has been completed on the interface, you should wait

for this period until the other interface begins printing the job.

1.1 Operation Indicators

Indicator Description

Flashing: Indicates when an error occurs

that you can clear by yourself.

Lit: Indicates that the printer is on-line.

The printer prints received data.

Off: Indicates that the printer is off-line.

Data can be received but will not be printed.

Also indicates when printing is automatical-

ly stopped due to occurrence of an error.

Flashing: Indicates data transfer is taking

place.

Lit: Indicates either that data is being proc-

essed, or that data is being written to the

memory card.

Flashing: Indicates when the printer needs

maintenance attention or the printer is

warming up (Please wait).

Lit:

Indicates when a problem or an error

occurs that you can clear by yourself. (For

example, paper jam occurs.)

1Flashing: Indicates when no paper is de-

tected.

Fast-Flashing:

Indicates that a paper

jam is occurring.

Lit:

Indicates that the MP tray is select-

ed.

2Flashing:

Indicates when the cassette or

paper is not detected, or when the paper

is loading.

Fast-Flashing:

Indicates that a paper

jam is occurring.

Lit:

Indicates that the cassette is select-

ed.

3Flashing:

Indicates that there is paper

jam in the optional finisher.

Lit: Indicates that the document finisher

is being selected.

READY

DATA

ATTENTION

1.2 Message Display

Message Meaning

Self test The printer is self-testing after power-up.

Please wait The printer is warming up and is not

ready. When the printer is switched on for

the first time after the toner container is

installed, (Adding toner) also appears.

Ready The printer is ready to print.

Processing The printer is receiving data, generating

graphics, reading a memory card/hard

disk, or printing.

Sleeping The printer is in Sleep mode. The printer

wakes from Sleep mode whenever a key

on the operator panel is pressed, the cov-

er is opened or closed, or data is re-

ceived. The printer then warms up and

goes online. The time that the printer

takes to enter Sleep mode depends on

the Sleep Timer setting.

Cancelling data

Jobs inside the printer are being can-

celed. To cancel a job, see the table on

page 3-3.

Waiting The printer is waiting for the end-of-job

command before printing the last page.

Pressing the GO key allows you to obtain

the last page immediately.

FormFeed TimeOut

The printer is printing the last page after

a waiting period.

1.3 Interface Indicator

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 142 143

Comments to this Manuals

No comments

KYOCERA S-9100DN User Manual Page 18

Comments to this Manuals

Related products and manuals for Copiers KYOCERA S-9100DN