Kyocera FAX System 12 User Manual download pdf (Page 135)

5-47

Using Convenient Fax Functions > Using a Connected Telephone

Remote Switch Function

You can start fax reception by operation from the connected telephone set. This function is convenient for using this

machine and a telephone set (commercially available product) in combination installed at places distant from each other.

Using the Remote Switch Dial

To start fax reception by operation from the connected telephone set, use the following

operation.

The connected telephone set makes a ringing tone.

Lift the handset of the telephone.

Press the remote switch dial number (2 digits).

When you hear the fax tone from the handset, enter the two-digit remote switch dial number

using the dial button on the telephone set. The telephone line switches to the machine, and

reception starts.

NOTE

In order to use remote switch, it is necessary to connect the tone signal-sending telephone

set (commercially available product) to the machine. However, even if it is a tone signal-

sending telephone set, this function may not be used satisfactorily depending on the type of

telephone set. For details, contact our agent or the store where you purchased this

machine.

The remote switch dial is set to 55 at the factory.

The remote switch dial number can be changed.

Remote SW Dial (page 8-12)

NOTE

You can change the number of times the ringing tone rings.

Rings(Normal) (page 8-11)

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 257 258

No comments

Kyocera FAX System 12 User Manual Page 135