KYOCERA FS-1010 User Manual download pdf (Page 90)

FS-1010

5-10

5-2-5 Removing the transfer roller

CAUTION Do not touch the transfer roller (sponge) surface. Oil and dust (particles of paper,

etc.) on the transfer roller can significantly deteriorate the print quality (white

spots, etc.).

When refitting the bushes and springs, make sure to refit the black colored bush

and spring on the left side. Also, observe the correct direction to which the bush

is fit in reference to the paper passing direction.

1. Remove the process unit. (See page 5-4)

2. Remove the transfer roller 1 from the both bushes.

Figure 5-2-9 Removing the transfer roller

Long

Short

Paper passing direction

Transfer roller

Bush

(Black colored)

Spring

(Black colored)

Bush

Gear

Spring

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 171 172

No comments

KYOCERA FS-1010 User Manual Page 90