KYOCERA FS-1010 User Manual download pdf (Page 30)

FS-1010

2-7

7. Push the lock lever #1 1 to the lock position.

8. Close the top cover 4.

Figure- 2-2-5 Locking the toner container

NOTE The printer is shipped from the factory with no toner supplied in its developer

(Process unit). When the printer is first switched on after the toner container is

installed in the manner above, there will be a delay of several minutes before

the printer gets ready to print a job.

This delay is necessary for the printer to fill the developer reservoir with a

sufficient amount of toner to continuously support a print job. The period of

time is approximately 15 minutes.

If the toner low or replace toner indication does not go off after installing the

new toner container, take the toner container out once, shake it well, then

install again.

LOCK

UNLOCK

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 171 172

No comments

KYOCERA FS-1010 User Manual Page 30