KYOCERA FS-1010 User Manual download pdf (Page 138)

6-26

FS-1010

(7) Unsharpness

Check paper for property.

• Paper with rugged surface or dump tends to cause unsharp printing. Replace paper with the one

that satisfies the paper specifications.

Check the transfer roller installation.

• The transfer roller must be supported by the bushes at the both ends. Clean the bush to remove oil

and debris. Replace the transfer roller if necessary (See page 5-10).

Check the transfer bias potential.

• Check the transfer bias output on the high voltage board. This requires removal of the left cover

and the test equipment. Replace the high voltage board if high voltage potential is not available on

the board (See page 5-14).

Check EcoPrint setting.

• The EcoPrint mode can provides faint, unsharp printing because it acts to conserve toner for draft

printing purpose. For normal printing, turn the EcoPrint mode off by using the Remote operation

panel. For details refer to the printer’s User’s Manual.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 171 172

No comments

KYOCERA FS-1010 User Manual Page 138