KYOCERA FS-1010 User Manual download pdf (Page 162)

C-3

FS-1010

Parallel interface

The printer uses a bidirectional parallel interface for high-speed data transmission for the host

computer. This interface includes the buffers which are compatible with the IEEE 1284 standards.

The parallel interface provides support for the ECP and nibble modes in this standards. The parallel

interface mode can be changed by commanding Prescribe commands on a PC.

Selecting the parallel interface mode

To change the parallel interface mode, a PC running MS-DOS is needed. Connect the printer to the

PC via the parallel interface. Then, at the DOS prompt, type a FRPO O0 (the letter O and the

number zero) command as follows depending on the desired parallel mode:

To set the parallel interface mode... Type at the DOS prompt...

Normal echo !R! FPRO O0, 0; EXIT; lpt1:

High-speed echo !R! FPRO O0, 1; EXIT; lpt1:

Nibble echo !R! FPRO O0, 5; EXIT; lpt1:

Automatic* echo !R! FPRO O0, 70; EXIT; lpt1:

*: Factory-set default.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 171 172

No comments

KYOCERA FS-1010 User Manual Page 162