KYOCERA FS-1010 User Manual download pdf (Page 103)

FS-1010

5-23

(2) Removing the heater lamp

WARNING The heater lamp is extremely hot immediately after the printer was running.

Allow substantial period of time until it cools down. Also, the heater lamp is

fragile: Handle it with great care.

CAUTION The heater lamps are fragile. Use extreme care when handling not to drop or

break.

Do not directly touch on the heater lamp. Finger prints on the heater lamp’s outer

surface can prevent proper fusing of toner on paper. When holding the heater

lamp, hold the ceramic parts of heater lamp at both ends.

When refitting the heater lamp, direct the short distance side from the projection

in the middle of the lamp facing the machine’s left side.

1. Remove and split the fuser unit (See page 5-20).

2. Remove all (four) separators (See previous page).

3. Remove one screw 1, release the tension of lamp A holder 2.

4. Remove the heater lamp 3 form the lamp B holder 4.

5. Remove the heater lamp 3 from the heat roller 5.

Figure 5-2-22 Removing the heater lamp

Machine

left side

Machine

right side

Projection

Short

Long

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 171 172

No comments

KYOCERA FS-1010 User Manual Page 103