KYOCERA FS-1325MFP Installation Guide Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 201
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
2-12
Preparation
Paper Type
The machine is capable of printing under the optimum setting for the type of paper being used.
Not only can preset paper types be selected, but it is also possible for you to define and select customized paper types.
Paper type can be changed using the printer driver and KYOCERA Client Tool. The following types of paper can be used.
Yes: Can be stored No: Cannot be stored
Preparing the Paper
After removing paper from the packaging, fan through the sheets to separate them prior to loading.
If using paper that has been folded or is curled, straighten it prior to loading. Failure to do so may result in a paper jam.
Paper Type
Paper Weight Displayed in
KYOCERA Client Tool
Duplex
Path*
Paper Type
Paper Weight Displayed in
KYOCERA Client Tool
Duplex
Path*
Plain Normal 2 Yes Color Normal 2 Yes
Preprinted Normal 2 Yes Prepunched Normal 2 Yes
Labels** Heavy 1 No Envelope** Heavy 2 No
Bond Heavy 1 Yes Cardstock** Heavy 2 No
Recycled Normal 2 Yes Thick Heavy 2 Yes
Vellum** Light No High quality Normal 2 Yes
Rough Heavy 1 Yes Custom 1 (to 8)*** Normal 2 Yes****
Letterhead Normal 2 Yes
* Automatic duplex printing is only possible on the FS-1025MFP, FS-1125MFP and FS-1325MFP.
** One sheet must be loaded at a time.
*** This is a paper type defined and registered by the user. Up to eight types of user settings may be defined. For
more information, refer to KYOCERA Client Tool User Guide.
**** When Custom is specified, duplex printing can be set in KYOCERA Client Tool.
IMPORTANT Ensure paper is not stapled and clips are removed.
You should not use inkjet printer paper or any paper with a special surface coating. (Such papers may cause paper
jams or other faults.)
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 200 201

Comments to this Manuals

No comments