KYOCERA FS-1041/KL3 Installation Guide download pdf (Page 60)

5-8

Troubleshooting

Clearing Paper Jams

If paper jams in the paper transport system, or no paper sheets are fed at all, the printer automatically goes offline, and the

Attention indicator will flash. KYOCERA Client Tool can indicate the location of the paper jam (the component where the

paper jam has occurred). Remove the paper jam. After removing the paper jam, the printer will resume printing.

Possible Paper Jam Locations

Detailed paper jam positions are as follows. Refer to the indicated page number to remove the paper jam.

General Considerations for Clearing Jams

Bear in mind the following considerations when attempting paper jam removal:

• If paper jams occur frequently, try using a different type of paper, replace the paper with paper from another ream, or

flip the paper stack over. The printer may have problems if paper jams recur after the paper is replaced.

• Whether or not the jammed pages are reproduced normally after printing is resumed, depends on the location of the

paper jam.

Paper jam location Description Reference page

A Rear cover Page 5-9, 5-10

B Cassette Page 5-11, 5-12

C Manual Feed tray Page 5-13

CAUTION When removing a paper jam, pull the paper gently so as not to tear it. Torn pieces of paper are

difficult to remove and may be easily overlooked, deterring the paper jam recovery.

FS-1040/FS-1041 FS-1060DN/FS-1061DN

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 74 75

No comments

KYOCERA FS-1041/KL3 Installation Guide Page 60