KYOCERA FS-1041/KL3 Installation Guide download pdf (Page 47)

4-3

Maintenance

Replacing the Toner Container

This section explains how to replace the toner container.

1 Open the front cover.

2 Pull out the toner container.

3 Take the new toner container out of the toner kit. Shake the new

toner container at least 10 times as shown in the figure in order to

distribute the toner evenly inside the container.

CAUTION Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns.

IMPORTANT During toner container replacement, temporarily move storage media and computer supplies (such as

floppy disks) away from the toner container. This is to avoid damaging media by the magnetism of toner.

KYOCERA Document Solutions Inc. is not liable against any damages or problems arising from the use of toner

containers other than those designated as original Kyocera toner containers. For optimum performance, it is also

recommended to use only the Kyocera toner containers which are specifically intended for use in your country or

region. If the toner container for another destinations is installed, the printer will stop printing.

Note You do not have to turn printer power off before starting the replacement. Any data that may be processing in

the printer will be deleted if you turn the printer power off.

Note Put the old toner container in the plastic bag (supplied

with the new toner kit) and discard it later according to the local

code or regulations for waste disposal.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 74 75

No comments

KYOCERA FS-1041/KL3 Installation Guide Page 47