Kyocera Command Center RX User Manual download pdf (Page 66)

Network Settings

62 Embedded Web Server

Do Not Use Proxy for Following Domains

Enter the domain address which do not use the proxy. Use a semicolon (;) between

multiple addresses.

3. Click Submit button.

IPv4 settings (Wired Network)

1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings

page opens.

2. This section includes the following items for configuration.

DHCP/BOOTP

Specifies whether or not to automatically obtain an IP address using DHCP or

BOOTP.

Auto-IP

When the Auto-IP is set to On, the IP address from 169.254.0.1 through

169.254.255.254 will usually be generated by itself. But if the IP address using

DHCP server or Manual settings has been decided and becomes a candidate as

the result of configuration, the Auto-IP address isn’t generated and decided even

when the Auto-IP is set to On.

If the IP address has already been entered in IP Address using Manual settings,

delete the address.

To enable the settings, restart network. Automatically-generated IP address

appears on Confuguration page under Device Information on navigation menu.

IP Address

If DHCP/BOOTP is set to Off, then a static IPv4 address can be entered in this field

as part of the system network settings. When DHCP/BOOTP is set to On, a

dynamic IPv4 address is assigned to the device, and the field is grayed out. The for-

mat of the IPv4 address is a sequence of numbers separated by dots.

For example: 192.168.110.171

Subnet Mask

Specifies the subnet mask. When DHCP/BOOTP is turned On, a dynamic IPv4

address is assigned to the device, and the field is grayed out.

Domain Name

Specifies the domain name of the domain to which the printing system belongs. It

should not contain the host printer name, for example, "abcde.com". abcde.com.

When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the

device, and the field is grayed out.

3. Click Submit button.

IPv4 settings (Wireless Network)

1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings

page opens.

2. This section includes the following items for configuration.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 117 118

No comments

Kyocera Command Center RX User Manual Page 66