Kyocera Command Center RX User Manual download pdf (Page 65)

Network Settings

User Guide 61

3. Click Submit button.

General Settings (Wireless Network)

1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings

page opens.

2. Select On to use TCP/IP on the wireless network.

3. Click Submit button.

General Settings (Common)

1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings

page opens.

2. When an IP address that was mapped by the DNS server has been changed, Dynamic

DNS automatically remaps the host name to the IP address. To activate the Dynamic

DNS Settings, set Dynamic DNS to On.

3. Click Submit button.

Proxy settings

1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings

page opens.

2. To configure the proxy, set Proxy to On, and specify the following items as necessary.

Automatically Detect

Select On when you detect the proxy server automatically.

Use Automatic Configuration Script

Select On and enter the address when you use the automatic configuration script.

Proxy Server (HTTP)

Enter the host name or IP address for the proxy server (HTTP). If you use the host

name, you must first specify the DNS server information.

Port Number

Enter the port number for the proxy server (HTTP).

Use the Same Proxy Server for All Protocols

Select On when you use the same proxy server for all protocols.

Proxy Server (HTTPS)

Enter the host name or IP address for the proxy server (HTTPS). If you use the host

name, you must first specify the DNS server information.

Port Number

Enter the port number for the proxy server (HTTPS).

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 117 118

No comments

Kyocera Command Center RX User Manual Page 65