KYOCERA 266ci User Manual download pdf (Page 218)

Chapter 7 Emulation

7-106

OS [Output Status]

This instruction returns an integer from 0 to 255 giving one byte of status information, as

follows:

status TERM

The following table describes the individual bits in the status byte. After powered up or

an IN instruction, bit positions 3 and 4 turn on making the bit value to be 24. Bit position

3 is cleared subsequently after delivering the status.

OT [Output carousel Type]

This instruction delivers information on the current carousel type and stall occupancy.

This may be used to determine those information in a remote location.

OT TERM

Response:

type, map TERM

The current carousel type and its pen map are delivered as 2 ASCII integers, each sepa-

rated by comma. The type field can contain the values –1 through 4, which have the fol-

lowing values:

Bit Position Bit Value Description

0 1 The pen is down.

1 2 P1 or P2 has been changed. This bit is cleared when actual P1 and

P2 values are read via the RS-232C interface, or when the IN

instruction is executed.

2 4 A digitized point is ready for output. This bit is cleared when the

point is output via the RS-232C interface, or when the IN instruc-

tion is executed.

3 8 Initialized. This bit is cleared when a status byte is output via the

RS-232C interface, or when the IN instruction is executed.

4 16 Ready to receive next data.

5 32 Error. This bit is cleared when an error number is output via the RS-

232C interface, or when the IN instruction is executed.

6 64 SRQ was set.

7 128 (Reserved)

Bit value when stall is occupied Pen stall

16 5

32 6

64 7

128 8

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 259 260

No comments

KYOCERA 266ci User Manual Page 218