Kyocera copier User Manual download pdf (Page 83)

Basic Operations 6-21

Basic Operations

Copy Size (continued)

Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued)

• When Wide size paper is highlighted, the popup menu will appear.

Use arrows to scroll to the desired wide size. In this case, both the wide size and

type selected will be indicated on the Basic Screen.

To specify the precise dimensions of paper to be used, follow the procedure below.

(1)Select the wide size as described above, then touch Input size. The Size Input

popup menu will be displayed.

(2)Touch the vertical size key to highlight it, then use the keypad on the popup

menu to enter the vertical size, or use arrows to scroll to that number.

The entered number should fall within the range from the vertical size of the

standard size corresponding to the selected wide size to the maximum of 314mm.

(3)Similarly, touch the horizontal size key to highlight it, then use the keypad on the

popup menu to enter the horizontal size, or use arrows to scroll that number.

The entered number should fall within the range from the horizontal size of the

standard size corresponding to the selected wide size to the maximum of 445mm.

In this case, the wide size and paper type selected will be displayed on the Basic

Screen, but the actual size information cannot be displayed.

4 Touch OK to return to the Basic Screen.

Paper Type/Size Selection Screen

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 291 292

No comments

Kyocera copier User Manual Page 83