Kyocera copier User Manual download pdf (Page 18)

Introduction 1-7

Introduction

Features of This Machine (continued)

• Image Shift

Create or remove a binding margin at the top, bottom, right and left edges (shift amount

from 0mm ~ 250mm in 1mm increments); reduce image to prevent image loss (reduce &

shift amount from 0 ~ 250mm in 1mm increments).

• Interrupt Copying

Interrupt copying in progress to perform copying from the platen glass.

• Job Memory

Program up to 30 jobs and Recall each job by job number, as needed. All compatible platen

glass functions can be programmed into Job Memory directly after they are selected.

• Job Status

Display the Job Status Screen to view the machine status, change the operation order of

reserve jobs, delete the unused reserve job, or display the previous job list.

• Lens Mode (Preset, Zoom)

Select Preset ratios, three reduction and three enlargement ratios.

Zoom ratios can be selected from 33% ~ 400% in 1% increments (400 dpi), or 33% ~

200% increments (600 dpi).

• Machine Status Confirmation

Display the current machine status on LCD for confirmation.

• Magnification

Set user-programmable ratios under User Set 1, User Set 2 and User Set 3.

• Manual Shut-off

Shut off the main power when pressing [POWER SAVER ON/OFF] key.

• Mixed Original

Copy mixed size originals from the document feeder in APS or AMS mode. APS

automatically selects the copy size of each original. AMS mode allows you to select one

paper size for all originals.

• Non-Image Area Erase

When copying from the platen glass when the document cover is open, copy only the

image area and not the exposed area of glass, which would otherwise copy as black.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 291 292

No comments

Kyocera copier User Manual Page 18