KYOCERA KM-P4850w User Manual download pdf (Page 30)

CHAPTER 4 PRINTER OPERATION

4-2

2. Printing with manually fed media

When printing through the bypass slot, perform the following

procedure.

NOTE

• Only one sheet of paper can be set onto the bypass table at a time.

• When using curled paper, smooth the paper. If the curling persists,

place the paper with the curled surface up.

Adjust the bypass guides to the paper size indications on

both sides of the bypass table.

Set the paper face down all the way into the feed slot aligned

with the paper size indication.

When placing paper in the bypass table, set the paper

quickly all the way into the feed slot. Once the paper is fed,

release the paper. If the paper is not set properly, a paper

jam may be detected.

If the paper is set obliquely, pull the paper out and then insert

it again.

Perform the appropriate printing procedure on your

computer.

NOTE

Refer to the Functions Edition (On-Line Manual) for more detailed

information on printing from your computer.

When the message “Set paper. bypass” appears, refer to

Step 2 and set the next sheet onto the bypass table. Printing

will start. Repeat this procedure to set sheets one at a time

onto the bypass table until the required number of sheets

has been loaded and printed.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

No comments

KYOCERA KM-P4850w User Manual Page 30