KYOCERA KM-P4850w User Manual download pdf (Page 18)

CHAPTER 2 PRIOR TO SET-UP

2-6

4. Energy Saver Function

The automatic energy saver function automatically sets the printer to

a low energy consumption mode when the printer has not been used

for a specific period of time. When in energy saver mode the

message “Pre heating” [“Now preheating”] will be displayed.

Upon detection of a print signal from the computer, the printer

automatically returns to its standard mode and starts printing.

Pressing the Enter key will also cause the printer to return to standard

mode. The time until the energy saver function activates (auto energy

saver time) is set to a factory default of 15 min. This value can be set

in the machine setting “6. Timer set” from 5 to 45 min., in 5 min.

increments (Page 5-7).

5. Auto Shutoff Function

The auto shutoff function consists of shutoff mode and sleep mode.

The factory default is set to sleep mode.

• Shutoff mode: Power is automatically turned OFF ( ) when the

printer has not been used for a specific period of time.

To return to normal operation from shut-off mode, turn ON ( | ) the

main switch.

• Sleep mode: The printer enters a sleep state when it has not been

used for a specific period of time. The message “Sleeping” will be

displayed when the printer is in sleep mode.

Upon detection of a print signal from the computer, the printer

automatically wakes up and starts printing. Pressing the Enter key

will also cause the printer to wake up.

The auto shut-off function can be configured in the machine setting “5.

Auto shutoff” (Page 5-7). The time until the auto shutoff feature

activates (auto shutoff time) is set to a factory default of 90 min. This

value can be set in the machine setting “6. Timer set” from 15 to 120

min., in 5 min. increments (Page 5-7).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

No comments

KYOCERA KM-P4850w User Manual Page 18