KYOCERA KM-P4850w User Manual download pdf (Page 10)

1-2

• If the floor is delicate against casters, when this product

is moved after installation, the floor material may be

damaged.

• During printing, some ozone is released, but the amount

does not cause any ill effect to one's health. If, however,

the printer is used over a long period of time in a poorly

ventilated room or when making an extremely large

number of copies, the smell may become unpleasant.

To maintain the appropriate environment for printing

work, it is suggested that the room be properly

ventilated.

■ Power supply/Grounding the printer

WARNING

• DO NOT use a power supply with a voltage other

than that specified. Avoid multiple connections in

the same outlet. These types of situations

present a danger of fire or electrical shock. .........

• Plug the power cord securely into the outlet. If

metallic objects come in contact with the prongs

on the plug, it may cause a fire or electric shock.

• Always connect the printer to an outlet with a

ground connection to avoid the danger of fire or

electrical shock in case of an electric short. If an

earth connection is not possible, contact your

service representative. .........................................

Other precautions

• Connect the power plug to the closest outlet possible to

the printer.

• The power supply cord is used as the main disconnect

device. Ensure that the socket/outlet is located/installed

near the equipment and is easily accessible.

■ Handling of plastic bags

WARNING

• Keep the plastic bags that are used with the

printer away from children. The plastic may cling

to their nose and mouth causing suffocation. .......

■ Environment

CAUTION

• Avoid placing the printer on or in locations which

are unstable or not level. Such locations may

cause the printer to fall down or fall over. This

type of situation presents a danger of personal

injury or damage to the printer. ............................

• Avoid locations with humidity or dust and dirt. If

dust or dirt become attached to the power plug,

clean the plug to avoid the danger of fire or

electrical shock.....................................................

• Avoid locations near radiators, heaters, or other

heat sources, or locations near flammable items,

to avoid the danger of fire. ...................................

• To keep the printer cool and facilitate changing of

parts and maintenance, allow access space as

shown below.

Leave adequate space, especially around the left

right and rear covers, to allow air to be properly

ventilated out of the printer. ..................................

• Always use the caster stoppers to stabilize the

printer once it is in place to keep it from moving

and/or falling over and causing injury. ..................

Other precautions

• Adverse environmental conditions may affect the safe

operation and performance of the printer. Install in an

air-conditioned room (recommended room temperature:

around 68°F [20°C], humidity: around 65%RH) and

avoid the following locations when selecting a site for

the printer.

Avoid locations near a window or with exposure to

direct sunlight.

Avoid locations with vibrations.

Avoid locations with drastic temperature fluctuations.

Avoid locations with direct exposure to hot or cold air.

Avoid poorly ventilated locations.

INSTALLATION PRECAUTIONS

Left:

11 13/16"

30 cm

Rear:

11 13/16"

30 cm

Right:

19 11/16"

50 cm

Front:

31 1/2"

80 cm

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Comments to this Manuals

No comments

KYOCERA KM-P4850w User Manual Page 10

Comments to this Manuals

Related products and manuals for Laser/LED printers KYOCERA KM-P4850w