KYOCERA All Pinters User Manual download pdf (Page 51)

COMMAND CENTER Pages

Operation Guide 47

Advanced > Security > IPSec > General

This page allows you to set access restrictions for IPSec protocol-based communication.

Authentication

Type

Selects either EAP-TLS or PEAP (EAP-MS-CHAPv2) for the

authentication type.

Name

Enter the name of the user who accesses the printing

system. The IEEE802.1x client certificate of this user must

be valid.

You can set a PEAP-based password. (This setting is valid

when PEAP (EAP-MS-CHAPv2) authentication type is

selected.)

Common Name

Specifies the common name of the server certificate if the

server is required to be authenticated. (This setting is valid

when PEAP (EAP-MS-CHAPv2) authentication type is

selected.)

Match Rule of

Common Name

When the server certificate is verified, the common name

specified under

Common Name

is compared with the

common name on the server certificate. This item allows you

to specify whether the common names are considered to be

matched if they exactly or partially match. (This setting is valid

when PEAP (EAP-MS-CHAPv2) authentication type is

selected.)

Certificate

Status

Displays whether the certificate is valid or not.

Item Description

IPSec

Specifies whether or not to enable the IPSec protocol. Select

On to enable the IPSec protocol. Select Off to disable it.

Restriction

Specifies the default policy for non-IPSec packets.

Select

Allow

to allow communication with all hosts and

networks including those not permitted by the rules described

under Advanced > Security > IPSec > Rule1 (to Rule3) on

page 48. Select

Deny

to allow communication only with the

hosts and networks permitted by the rules.

Authentication

Type

Specifies the authentication type used for IKE phase1. To set

a character string as the shared key and use it for

communication, select Pre-shared and enter the string of

the pre-shared key in the text box. To use a CA-issued

device certificate or root certificate, select Certificates.

When you select Certificates, the contents of the CA

certificate and root 1 to 3 certificates are displayed if they are

enabled. When you click the CA or Root button, you can

view, import or delete CA-issued or root certificates.

Rule1 (to Rule3)

Shows whether the set rule is enabled or disabled. To enable

or disable the rule, refer to Advanced > Security > IPSec >

Rule1 (to Rule3) on page 48.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments

KYOCERA All Pinters User Manual Page 51

Comments to this Manuals

Related products and manuals for Copiers KYOCERA All Pinters