KYOCERA FS-5900C User Manual download pdf (Page 104)

Care and Maintenance

■ Media problems

Trouble Possible Cause

Frequent paper-picking

errors

Fan the paper or transparencies before installing them in

their respective cassettes; this is especially important for

transparencies because they tend to stick together.

Make sure that you have loaded paper in the paper tray and

transparencies in the transparency cassette.

Make sure that the media is installed under the hooks at the

front of the media cassette.

If printing on transparencies and your printer has an option

Paper Feeder, make sure that the transparency cassette is

installed in the upper or middle tray slot.

Clean the paper-pick rollers (☞ P. 64).

Frequent media jams Make sure that you use a high-quality laser paper:

60-105 g/m

(16-28 lbs.) paper in the media cassettes and

75-165 g/m

(20-44 lbs.) paper in the multi-purpose tray.

If you are using media that is 105 g/m

(28 lbs.), check if the

Face Down media output setting is selected in the driver. If

it is, change the setting to Face Up.

Use only recommended transparencies (☞ P. 114). We

cannot guarantee the results of using other transparencies.

Make sure that the media is installed under the hooks at the

front of the media cassette.

Do not overfill the media cassette, as indicated by the red

line on the right side of the cassette.

Clean the paper-pick rollers (☞ P. 64).

Make sure that the media thickness switch is set correctly

for the installed media (☞ P. 19).

Trouble Possible Cause

Off-set images Check your application for correct image sizing.

Cut-off images Check your application for image sizing.

Make sure that the correct size media is in the media cassette.

■ Problems with image size and position

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 131 132

No comments

KYOCERA FS-5900C User Manual Page 104