Kyocera DuraForce Pro User Manual download pdf (Page 16)

Set Up Your Phone 6

2. Plug the smaller end of the USB cable into the phone’s Charger/USB port.

3. Plug the other end of the USB cable into the AC adapter, and then plug the adapter into an

electrical outlet. Be sure to use the AC adapter that came with your phone.

4. When charging is complete, remove the cable from the port and close the cover. Press around

the edges of the cover to ensure that it is securely closed.

Note: Your phone’s battery should have enough charge for the phone to turn on and find a signal, set up

voicemail, and make a call. You should fully charge the battery as soon as possible.

Warning: Be sure all ports and covers are properly sealed to maintain the phone’s waterproof capability.

 Fully charging a battery may take up to three hours.

5. After charging, disconnect the phone from the charger.

 Unplug the AC adapter from the outlet, and remove the USB cable from the phone and the

AC adapter.

Charge Using a PC Connection

Before using a PC connection to charge your phone, ensure that the computer is turned on. Depending

on the type of connection, your phone’s battery may not charge.

1. Insert the small end of the USB cable into the phone’s charger/USB port.

2. Insert the large end of the USB cable into an external USB port on your computer.

3. After charging, remove the USB cable from both the phone and the computer.

Charge the Battery Wirelessly

Your phone supports the PMA standard via a wireless charging accessory (sold separately). Follow the

steps below to charge the battery using a wireless charger.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 244 245

No comments

Kyocera DuraForce Pro User Manual Page 16